Backup keys – Lathem LX100 User Manual
Page 8
Lathem Security Solutions
Page 8
Backup Keys
The keys enclosed with your LX100 are for backup purposes in
the event of badge loss or battery failure only. Keep your keys in
a protected and easy-to-remember location OUTSIDE of the
room the lock is on. Lathem does not manufacture or stock extra
keys. You are responsible for their safekeeping.
1. The keyhole cover is attached using a high-powered magnet.
Your backup keys also have a smaller magnet embedded on
one side to assist in removing the keyhole cover. Or, you
can use your fingernail to pry open the cover.
2. After removing keyhole cover, place key in keyhole with
arrow and notch pointing up to align with dot above keyhole.
3. Insert key and turn to the right until key stops.
4. While key is turned, push handle down to open door.