Lexicon MPX 100 - Manual (Page 18)

15
System Mode Parameters
1 Bypass Mute/Bypass
This parameter sets the Bypass button (or
the footswitch, or MIDI controller assigned to
Bypass) to mute the inputs, or to bypass the
processed audio (passing only dry audio to
the outputs).
2 Patching Disable/Enable
This parameter allows you to temporarily
suspend (Disable) and restore (Enable) any
Learned patches.
3 Program Load Mute/Bypass
This parameter determines whether the
MPX 100 will engage wet mute or simply
bypass processed audio during program
load.
4 Digital Output Dry/Wet
For certain recording and monitoring appli-
cations, this parameter allows you to choose
to pass only dry audio, or to resume output of
the full, processed signal.
5 MIDI OUT/THRU Out/Thru
Sets the rear panel MIDI OUT/THRU jack for
either MIDI OUT or MIDI THRU functionality.
6 MIDI Pgm Change Disable/Enable
The setting of this parameter determines
whether or not the MPX 100 will recognize
MIDI Program Change messages for loading
programs.
7 MIDI Clock Receive Disable/Enable
The setting of this parameter determines
whether or not the MPX 100 will recognize
MIDI Clock messages.
8 Tempo Program/Global
Determines whether the current tempo of the
MPX 100 will be applied to all programs
(Global), or whether program-specific tem-
pos are restored on each program load.
14-16 MIDI Dumps
These selections allow you to execute MIDI
Dumps. See MIDI Operation.