Lifetime 65004 - Manual (Page 15)

15
• Before towing the Trailer, you must ensure the lug nuts are tightened to the proper
torque.
• The torque requirements for the Lug Nuts are 95 - 120 ft./lb. Do not exceed 120
ft./lb of torque. Tighten the Lug Nuts in the sequence below before you leave the
dealer.
9HULI\WKHSURSHU36,IRU\RXUWLUH
‡7LUHSUHVVXUHIRUD´ULP WLUHVKRXOGEHDW80 psi.
Lug Nuts: Tightening Sequence, Torque Requirements
Tighten lug nuts
in the following
order:
1
2
3
4
5
WARNING
Do NOT remove or loosen banding until you’re ready to
assemble the trailer. If you loosen the banding, trailer parts may
dislodge, fall off the trailer during towing and cause an accident.
Failure to follow this warning could result in property damage,
serious injury and death.
WARNING
Lug nuts are prone to loosen after initial installation possibly causing
the wheel to separate from the trailer leading to property damage, death
or serious injury.
‡&KHFNOXJQXWVIRUWLJKWQHVVRQDQHZWUDLOHURUZKHQZKHHO V KDYH
EHHQUHPRXQWHGDIWHUWKH¿UVWDQGPLOHVRIGULYLQJDQG
after any impact.
• Lug nuts for the tires must be tightened by the user before each use.
• Lifetime Products cannot be held responsible for damages caused by
loosened lug nuts.