LifeSpan MyTread TR100 User Manual
Page 23
TR100 / TR200
MyTread
Leveling the Treadmill
For optimum performance the treadmill should be level. To level the TR100 and TR200
model treadmills use the adjustable feet underneath the back of the treadmill.
Loosen the lock nut on each foot and unscrew the feet to the desired height making
sure that the treadmill sits stable and even on the floor. Tighten each lock nut.
Adaquate Space
Make sure you have room to lay the treadmill down. There needs to be at least 2 feet
of clearance on both sides and in the front of the treadmill. There should be at least
4 feet of clearance on the back side of the treadmill for safety reasons. If the user
were to fall this would give adequate clearance to get off the treadmill.
Moving
The treadmill is equipped with transport wheels located in front. To move, lift up on
the back end of the frame. Relocate the treadmill by rolling the treadmill on these wheels.