Quad mode – LOREX Technology LW2301 User Manual
Page 23
19
Quad Mode
Use Quad mode to view up to four cameras simultaneously.
To enable/disable Quad mode:
•
Press the QUAD button on the wireless receiver or the remote control; The Schedule
Recording warning appears briefly on-screen (see figure 5.2), then the Quad display
mode begins.
NOTE: The signal indicator or SD card icon are not shown while the receiver is in Quad mode.
NOTE: You cannot access the Main Menu while the system is in Quad Mode.
Quad mode is also available while in Zoom mode. For details on using Zoom, see “Zoom” on
page 43.
Recording Tip!
Using Quad Mode with Motion Recording is a highly
recommended recording solution. For more details, see
“Motion Recording” on page 25.
Figure 5.1 Quad Mode
C
C
a
a
m
m
1
1
C
C
a
a
m
m
2
2
C
C
a
a
m
m
3
3
C
C
a
a
m
m
4
4
ATTENTION
: While in Quad Mode,
you cannot turn on Schedule
Recording.
Schedule
Recording Cannot
begin because you
are in Quad Mode
Figure 5.2 Quad Mode warning