Lennox Hearth IMPRESSA F50 - Manual (Page 15)

15
Ⅲ Turn the Rotary Switch (1) until Aroma is displayed.
Ⅲ
AROMA
Ⅲ Press the Rotary Switch (1).
Ⅲ
ROBUST
Ⅲ Turn the Rotary Switch (1) until the following message is dis-
played:
Ⅲ
STANDARD
Ⅲ To confirm the new aroma settings, press the Rotary Switch (1).
Ⅲ
AROMA
Ⅲ Press the programming key
(4) to quit the programming
mode or select the next programming item using the Rotary
Switch (1).
Ⅲ READY
15.4 Programming the temperature
Ⅲ READY
Ⅲ Press programming key
(4) until
FILTER appears.
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until Temperature is displayed.
Ⅲ
TEMPERATURE
Ⅲ Press the Rotary Switch (1).
Ⅲ
HIGH
Ⅲ Turn the Rotary Switch (1) to change the temperature from
HIGH to NORMAL (or vice versa).
Ⅲ
NORMAL
Ⅲ To confirm the new settings, press the Rotary Switch (1).
Ⅲ
TEMPERATURE
Ⅲ Press the programming key
(4) to quit the programming
mode or select the next programming item using the Rotary
Switch (1).
Ⅲ
READY
15.5 Programming the time
You must programme the time if you want to use the auto-
matic switch-on function.
Ⅲ READY
Ⅲ Press programming key
(4) until
FILTER appears.
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until TIME is displayed.
Ⅲ
TIME
Ⅲ Now press the Rotary Switch (1) to start programming the time.
Ⅲ
--:--
Ⅲ Turn the Rotary Switch (1) to adjust the hours..
Ⅲ
12:--
Ⅲ Press the Rotary Switch (1) to confirm the hour settings and to
activate the minutes.
Ⅲ
12:--
Ⅲ Turn the Rotary Switch (1) to select the minutes.
Ⅲ
2:05
Ⅲ To confirm the new settings, press the Rotary Switch (1).
Ⅲ
TIME
Ⅲ Press the programming key
(4) to quit the programming
mode or select the next programming item using the Rotary
Switch (1).
Ⅲ
READY
E