LevelOne FPS-3002USB - Manual (Page 62)

Troubleshooting
9. Click the Browse Device button, select the desired LevelOne Printer
Server, and click OK.
10. Click OK to return to the Printers folders, and right-click on the
Printer. Ensure that the Work off-line option is NOT checked.
The Printer should no longer be grayed out, and is ready for use.
Problem No. 3 I connected and configured a WPS (Windows Printing System)
printer as described, but I can't get the print job to print.
Solution No. 3 Printer drivers for WPS printers poll the printer before sending print
data. Since the printer is networked, the printer is not found and no data
is sent. The solution is to add your printer as a network printer as
described in Solution 2 above.
Problem No. 4 Using Windows 2000/XP, I installed the printer using LPD as
recommended, but I can't print.
Solution No. 4
• Check that the correct Printer driver is being used.
• Try disabling the Bidirectional printing support:
• Open the Printers folder.
• Right-click on the Printer, and select Properties.
• Select the Ports tab.
• Uncheck the Enable bidirectional support checkbox.
- 59 -