LEICA GPS1200 User Manual
Page 70
70
GPS1200+
Reference Station
)
A ruggedized ethernet cable is used to connect the GRX1200+ Series to the
internet. Any PC connected to the internet can then be used to configure the sensor.
)
The data transfer cable GX RX to RS232 or an ethernet crossover cable can be used
to connect the GRX1200+ Series directly to a PC.
a) Network hub or router for Internet
connection
k) Surge arrester
b) Power supply unit 100/240 V AC to
12 V DC
l)
CompactFlash card
c) Interface cable
m) Radio interface cable
d) DB9 surge arrester with 12 V DC
pass through
n) Radio
e) Meteo/tilt device with interface cable o) Cable to connect radio antenna
f)
Receiver GRX1200+ Series
p) PC for running LEICA GNSS Spider
software or the web interface
g) Weather protection radome for
AT504 GG/AR25
q) Ethernet cable for data transfer and
receiver communication
h) AT504 GG/AR25
r) Ethernet port
i)
AX1203+ GNSS
s) Radio antenna
j)
TNC to TNC antenna cable
t)
Radio surge arrester