Lucent Technologies INDeX 20DS - Manual (Page 5)

Using the 20DS – Page 5
38DHB0002UKCN – Issue 3 March 2000 INDeX 20DS User's Guide
Using the 20DS
Notes
Once associated with a phone, the 20DS provides that phone with an
additional 42 DSS keys. This section gives examples of some of the
functions of the keys.
To check the unit is associated:
1. Press PROGRAM on your phone.
2. Press one of the DSS keys on the 20DS.
– If ENTER PASSCODE appears on the phone, then the units are
correctly associated.
– If ENTER PASSCODE does not appear, the 20DS is associated
with another phone (see "Reassociating a DSS Unit" on page 9).
3. Press PROGRAM to end the test.
Setting up the DSS Keys.
See "Programming the DSS Keys" on page 9.
Making Calls
To call an extension or group of extensions:
1. Press the DSS key under which the extension or group is set.
2. If busy (shown by a solid red BLF lamp), your phone displays the
options available (usually callback or camp on).
To make an external call using a particular line or group of lines:
1. Press the DSS key under which the line or line group is set.
2. If busy (shown by a solid red BLF lamp), your phone displays the
options available.
3. Otherwise, dial the external number.
Answering a Call - Fast Green Flash
A fast flashing green lamp shows an external call ringing on a line.
To answer a call:
1. Press the fast flashing DSS key associated with the call you want to
answer.
2. Continue the call using handsfree or pickup the handset.
3. To end the call either press ANSWER RELEASE or replace the
handset.