Legacy Car Audio LDVD52 - Manual (Page 6)

Note:
It is recomended to connect
to car battery.
6 7
Preparation before operation Preparation before operation
DVD+AMP DVD+AC
Power connection drawing while operating in room
Connect AC adapter to +12V input
DVD+CHOKE
Power connection for automotive application
DVD WITH TV TUNER + ANTENNA (THIS CONNECTED
ONLY USE IN DVD WITH TV TUNER MODEL)
AMP
WHITE RED
YELLOW
L R VIDEO S-VIDEO
-110V 60Hz
ADAPTOR
CAR DC12V
+12V
Ground
+RED
-BLACK
CHOKE
ANT
YELLOW
BLUE
ACC(IGNITION SWITCH)
REMOTE OUT
UP ADAPTOR WIRE
When you turn off the car's
power supply by key (ACC),
the unit will be turn off and
can remember the latest
picture. When you turn on
the IGNITION SWITCH
again and play DVD, the
unit will play from the
memory point.
When you turn off the car's
power supply by key (ACC),
and want to take away the
disc, you can turn on the
unit's power supply by push
[POWER] on the unit or
remote control, and take
away disc, then turn off the
unit's power supply. If you
forget turning off the unit's
power supply, the unit can
turn off automatically after
30 second.
12V remote out
It provides the power of DC
12V/0.5A when power of
the product is on. If you turn
off power of the product, it
will have no output.
RF IN (FROM ANT)