Lenoxx Electronics PDV-702 - Manual (Page 7)

IB-PDV702-WM-E-010807
POWER SUPPLY
You can power this portable DVD player by connecting the AC adaptor, the car adaptor or the
rechargeable battery (all included).
A. Using the AC adaptor
This player is supplied with an AC adaptor
for powering the unit and charging the
battery.
Insert the AC adaptor plug to the DC IN jack
on the portable DVD player and connect the
adaptor to a wall outlet.
B. Using the car adaptor (12V)
Insert the car adaptor plug to the DC IN jack on the portable DVD player and connect the car
adaptor to the vehicle’s 12V accessory / cigarette lighter socket, the car adaptor indicator will light
up.
CAUTION:
1. The included car adaptor is for use with this unit only. Do not use it with other equipment.
2. Use this unit only with the included car adaptor, using with other car adaptors could damage
the unit and the unit may not work.
3. Do not operate this unit or view video movies while driving a vehicle.
4. If some lines appear on the screen during the startup of the vehicle, please turn the unit off
and turn it on again after the vehicle is running.
5. Place the unit in a proper position for viewing.
6. When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section
may become hot or not work due to poor contact. Be sure to clean the cigarette lighter
socket before use.
7. Disconnect the car adaptor from both the unit and the cigarette lighter socket when the
battery is fully charged and the unit is not in use.
This player is supplied with a 12V car adaptor for powering the unit and recharging the battery
while in a vehicle that has a 12V power system.
6
IB-PDV702-WM-E-010807.pmd 1/30/2007, 7:12 PM 7