Lennox Hearth BT8040 - Manual (Page 11)


en
g
li
sh
Jabra bt8040 bluetooth stereo headset
I cannot use Reject call, call on hold, Redial or voice dialling
these features are dependent on the ability of your phone to
support a hands-free profile . even if the handsfree profile is imple-
mented reject call, call hold and voice dialing are optional features
which are not supported by all devices . please consult your device
manual for details .
please note that some features can only be operated from the
primary device e .g . voice dial using Jabra bt8040 with 2 mobile
phones .
The device is not connected to my headset in time to answer
an incoming call
If the headset is off and is turned on when a call is incoming, the
device and headset might not connect in time for the call to be
answered . In order to avoid such inconveniences please keep the
headset on, in range and connected .
The music player starts playing when connecting to the
headset
some phones may stat the music player once it connects to the
headset . re-pair your headset to the device in order to avoid this
behaviour .
1. make sure the headset is off
2. press and hold the answer / end button for approx 5 sec until
the light turns solid blue
3. continue press and hold the answer / end button until the solid
blue light turns off
4. continue press and hold until a solid purple light turns on
Go through the regular steps in paring the headset to a bluetooth
device .
The music stream from my connected device is choppy or the
music pitch is changing
If you have connected two devices and go out of range of one de-
vice while playing music from the connected device, the headset
will try to reconnect to the lost device . this can cause the audio
stream to be disrupted . For example the music audio is choppy
or the audio pitch varies . In order to prevent this do not go out of
range of your paired/connected devices .