Lancom Systems LCOS 3.50 - Manual (Page 319)

̈ Chapter 14: Virtual Private Networks—VPN LANCOM Reference Manual LCOS 3.50
319
V
irt
ua
l Pri
vat
e Ne
two
rks—
VP
N
ቤ Under Configuration ̈ VPN ̈ Connection list generate a new entry
with the name of the remote gateway set to “Name”. For the “Remote
gateway”, enter the public address of the remote station: either the fixed
IP address or the name for translation by DNS.
ብ When using LANCOM Dynamic VPN: Under Configuration ̈ Setup ̈
WAN module ̈ PPP list make a new entry.
Select the remote VPN gateway as the remote site, enter the User Name
as the name of the VPN connection that the remote VPN gateway uses to
address the local device, and enter a suitable password that is identical at
both locations.
Be sure to activate "IP routing" and, if required, "NetBIOS over IP"
(
→ page 310).
ቦ Under Configuration ̈ Setup ̈ IP router module ̈ IP routing
table generate a new entry for each network portion that should be