LaCie Databank - Manual (Page 10)

3. Installing Your LaCie Drive
page 10
LaCie Data Bank Hi-Speed USB 2.0
User’s Manual
Windows 98 SE and Windows Me Users
To use your new LaCie Hard Drive, first install the necessary driver software and then Silverlining 98. Follow the steps below
to install the necessary drivers and software to configure your drive. Then move on to
3.1. Connecting Your LaCie Drive To
Your Computer .
Silverlining 98 and USB 2.0 Driver Installation
Step 1
Insert the LaCie Storage Utilities CD-ROM in your computer’s
internal CD/DVD drive and open the disc.
A) Double-click the USB 2.0 Drivers Install folder.
B) Double-click on the LaCie_USB_Driver_Install.exe icon. The
LaCie USB2 Storage Driver
screen will appear. Click on Next.
C) Installation will finish automatically.
Step 2
Re-open the LaCie Storage Utilities CD-ROM.
A) Double-click the Silverlining 98 folder.
B) Double-click the Silverlining98_Install.EXE icon.
C) Silverlining 98 will then initialize the install screen.
D) The “Welcome” screen will appear. Click Next.
E) The “Destination Location” screen will appear. To alter the location where the software is installed on your system, click the
Browse
button. If you do not want to change the location, do not click on the Browse button, and allow the software to be
installed in its default location. Click Next to continue.
F) Next is the “Start Installation” screen. Click Next.
G The software installation will begin, and you will see the installation screens.
H) Finally, you will see the “Silverlining 98 has been installed correctly” screen. Click Finish to complete the installation.
Step 1)
Step 2)