Line 6 POD Farm UX1 - Manual (Page 6)

Line 6 POD Farm 1.01 – Start Here
1•3
Register Your Hardware
If you have not already done so, you’ll be prompted to Register your connected Line 6 hardware. It’s a
painless process really, so click that Register Now button and fill in the blanks on the Web page. This
page will list all your registered Line 6 gear in one place.
Grab Those Updates
Go to the Updates tab in Line 6 Monkey. If you see any items where a newer, updated version is
available, then you should click on that item and let the little monkey fellow walk you through the
installation steps. This is the easiest way to stay current on the latest POD Farm software updates, as
well as drivers and firmware updates. You can check the Optional Add-Ons* tab to see what other
goodies might be available for your specific Line 6 device too.
*Note - Some Line 6 hardware models already include the POD Farm Plug-In, and/or other Add-Ons for
free. You’ll need to “activate” these items by running Line 6 Monkey - see the following section.
Purchasing POD Farm Plug-In
POD Farm Plug-In is of course already included with the new POD Studio hardware. But if you own a
Line 6 TonePort, GuitarPort, POD X3 or PODxt device, then you can purchase the POD Farm Plug-In
as an Add-On. Just click on the Optional Add-Ons tab in Line 6 Monkey, select POD Farm Plug-In,
then click on Purchase Add-Ons.