Lindy LF1TBELRG - Manual (Page 27)

LINDY CPU Switch Smart Installation and Use Page 20
you may reset the LINDY CPU Switch Smart by powering off all the attached
computers and removing the optional power adapter.
Step 4 - Ensure that the LINDY CPU Switch Smart is powered on
Ensure that the LINDY CPU Switch Smart is powered on. It is normally possible to
upgrade the LINDY CPU Switch Smart when it is powered from a single computer,
however it is good practice to ensure that there is the maximum possible power
availability during flash upgrades and so if possible ensure that all the computers
are powered on. The upgrade program monitors the LINDY CPU Switch Smart’s
voltage and will not allow an upgrade to be performed if the voltage is insufficient.
The display should now show:
Step 5 - Run the upgrade program
The latest version of the LINDY CPU Switch Smart firmware is available from the
LINDY Technology website at www.lindy.com. The program and data files are
supplied as a pair e.g.
CPUSS129.EXE
CPUSS129.HEX
and should be downloaded to the same directory on your PC. Run the file
CPUSSxxx.EXE (e.g. CPUSS129.EXE) and follow the on-screen instructions. During
the upgrade the display will show an upper case U and the dot will flash to show that
the upgrade is in progress.
The display will again show a lower case U when the download is complete. Move
option switch 7 to the OFF position to exit upgrade mode and start normal operation.