Lindy Ethernet Powerline Adaptor 25131 - Manual (Page 6)

4. Hardware Connection – Internet
Follow the procedures describe below to connect the Ethernet Powerline Adaptor to your ADSL
broadband connection:
1. Power off your PC or Notebook.
2. Connect the provided Ethernet (RJ-45) cable to the Ethernet Powerline Adaptor’s Ethernet port.
3. Connect the other end of the Ethernet (RJ-45) cable to an available Ethernet port of your ADSL
broadband Router.
4. Plug the Ethernet Powerline Adaptor into a wall socket next to the computer.
5. Turn on your computer.
6. Check and confirm that the Power, Powerline and Ethernet LEDs on the Ethernet Powerline
Adaptor are ON.
Ethernet Powerline Adaptor 5