Loctite HYSOL P/N 98036 - Manual (Page 7)

Page 6
FOR ANY REPAIRS OR ADJUSTMENTS – OTHER THAN THOSE DETAILED IN
THIS MANUAL – PLEASE CONTACT 1-800-LOCTITE.
8. Care and Maintenance
Every attempt has been made to make this exceptionally powerful tool both reliable
and trouble-free. However the following precautions should be noted:
• Make sure that the applicator is up to temperature before attempting to operate.
• Do not leave the applicator switched on for long periods without use. If the
applicator is not to be used for forty minutes or more, switch it off and restart when
required.
• Keep the applicator upright when not in use, never lay it on its side. Always use the
stand provided, or the optional bench stand or suspension unit (see Spares and
Accessory lists at the end of this manual).
• Do not use excessive force on the trigger. Ensure that the tool has fully warmed up
before use.
• Keep the nozzle clean to prevent adhesive build-up. This is easily done by wiping
the nozzle with clean paper or cloth while the nozzle is still warm.
9. Accessories and Spare Parts
Spare Parts Part Number
2-Part Nozzle Assembly - supplied with tool 985078
Nozzle Adapter 985088
Applicator Stand 985069
Nozzle Shroud Kit, Qty 5 985223
Barrel PTFE 985071
Barrel Support Assembly 985091
Piston Support Assembly 985093
Piston Assembly 985095
Piston Support O-ring Kit, Qty 5 985234
Thermostat Assembly, 383
°F (195°C)
985079
Thermostat Assembly, 400
°F (204°C) (for polyamides) 985068
Heater Assembly 120 Volts 985080
PCB Assembly 985083
Thermal Fuse, Spacer Assembly 985076
Valve Body Airline Adapter 985240
Heater Housing Kit For 98036 (EVA Adhesive) 985227
Qty 1 – O-ring Heater Housing, item 5
Qty 1 – Heater Housing, item 6
Qty 1 – Ground Screw, item 35
Qty 1 - Lock Washer, item 39
Heater Housing Kit For 98040 (Polyamides Adhesives) 985237
Qty 1 – O-ring Heater Housing, item 44
Qty 1 – Heater Housing, item 45
Qty 1 – Ground Screw, item 35
Qty 1 - Lock Washer, item 39
Handle Kit 985228
Qty 2 – Moulded handles, item 1
Qty 6 – Casing Screws, item 34
Piston Support Hardware Kit 985229
Qty 1 – Washer, special with 4 holes, item 30
Qty 1 – Pivot o-ring, item 26