Lifescan One Touch ll - Manual (Page 61)

to review and
analyze your
results.
On the side
of the meter
there is a
port marked
“DATA” which
allows you to
connect to
various data
management
systems. To
communicate
with these systems, you will
need to select the correct
mode for the type of data
management system you are
using. The meter is set at the
factory in the RS-232 data
management mode.
• In the RS-232 mode, you
may also select the baud
rate —the data communica-
tions rate for a specific
application (300, 1200,
2400, or 9600).
• You may connect the
ONE TOUCH ® II Meter
to the Data Manager ™
by LifeScan using the
DTAMGR mode. For
information, see page 61.
For information on other data
management options, call the
LifeScan Data Management
Line at 1 800 382-7226.
To set the special functions:
Use the M and C buttons
and follow the steps listed
in the chart.
You may save your selection
and exit at any time by
turning the meter off.
56
LSI-99-221_9/2/99 11/11/99 11:01 AM Page 56