LifeSource UA-100 - Manual (Page 4)

LifeSource Health Line (Toll-Free): 1-888-726-9966
1. Place cuff with arrow pointing towards you.
2. Make sure cuff end has been inserted through the D-Ring.
3. Insert single end of the Y-Tube into stethoscope head.
4. Insert each arm of the Y-Tube into each bottom end of the
binaurals.
5. Insert air release valve into left bladder tube.
6. Insert manometer into right bladder tube.
ASSEMBLY INSTRUCTIONS
E-3 LifeSource Health Line (Toll-Free): 1-888-726-9966
HOME BLOOD PRESSURE KIT COMPONENTS
E-2
Ear tips
Binaurals
Inflation Bulb
Air Release Valve
Manometer
Left Bladder Tube
Right Bladder Tube
Y-Tube
Cuff D-Ring Vinyl Carr ying Case
Stethoscope Head
Cuff
Calibration
Screwdriver
Ear tips
Binaurals
Inflation Bulb
Air Release Valve
Manometer
Left Bladder Tube
Right Bladder Tube
Y-Tube
Cuff D-Ring
Cuff
Stethoscope Head
Vinyl Carrying Case
Calibration
Screwdriver
List of Components:
Tips for Blood Pressure Monitoring:
• Relax for about 5 to 10 minutes before measurement.
• Remove constricting clothing and place cuff on bare arm.
• Unless your physician recommends otherwise, use left arm to
measure pressure.
TAKING YOUR BLOOD PRESSURE