Lantronix MINI FAST LFH4-M User Manual
Page 8
Figure 2-2 LFH4-M Front Panel
Figure 2-3 LFH8-M Front Panel
The LFH Mini Fast Ethernet Hubs were designed for easy Òplug and
playÓ installation. Before you connect the LFH to other devices, there
are several issues you should keep in mind:
▼
When connecting the LFH to a workstation using unshielded
twisted pair cable, you must make sure that the cable length is not
greater than 100 meters
▼
When you connect two LFH hubs, you must make sure that the link
between them is not longer than 5 meters
▼
Network cable segments can be connected to, or disconnected from
the hub while the power is on. Plugging in or removing network
cables while your hub is operating will not interrupt the operation
of the hub
▼
When placing your LFH hub, you need to avoid dusty locations and
electromagnetically noisy areas
7
4
3
2
1
4
3
2
1
PWR
COL
PARTITION
LINK/ACT
PORT NO.
LFH4-M
Uplink
4
3
2
1
4
3
2
1
PWR
COL
PARTITION
LINK/ACT
PORT NO.
LFH4-M
Uplink