Lindy 42829 User Manual
Page 15
Advertising
EN 15
If the authorization has been successful, the home page of the USB 2.0 DEVICE SERVER NAS
application will be visible as shown below.
3.1.
Network Settings
The “Network” tab allows you to configure both wired as well as wireless interfaces. For the wired side
we can configure the Static IP manually or set the box to automatically obtain an IP address by setting to
the Dynamic (DHCP) mode.
(Make sure that the DHCP server should be in ON).
If the user selects the Network Interface type as “Wireless LAN” the browser shows the Wireless
configuration web page as shown below.
Advertising