Lanner electronic FW-7650 - Manual (Page 32)

Item Options Description
Date Month DD YYYY
Set the system date. Note that the ‘Day’
automatically changes when you set the
date
Time HH : MM : SS Set the system time
IDE Channel 0
Master
Options are in its sub menu
Press <Enter> to enter the sub menu of
detailed options
IDE Channel 0 Slave Options are in its sub menu
Press <Enter> to enter the sub menu of
detailed options
IDE Channel 1
Master
Options are in its sub menu
Press <Enter> to enter the sub menu of
detailed options
IDE Channel 2
Master
Options are in its sub menu
Press <Enter> to enter the sub menu of
detailed options
Halt On
All Errors
No Errors
All, but Keyboard
All, but Diskette
All, but Disk/Key
Select the situation in which you want the
BIOS to stop the POST process and notify
you
Base Memory N/A
Displays the amount of conventional
memory detected during boot up
Extended Memory N/A
Displays the amount of extended memory
detected during boot up
Total Memory N/A
Displays the total memory available in the
system
IDE Adapters
The IDE adapters control the hard disk drive. Use a separate sub menu to configure each
hard disk drive.
IDE Primary Master sub menu
Use the legend keys to navigate through this menu and exit to the main menu. Use Table 1
to configure the hard disk.
Item Options Description
IDE HDD
Auto-detection
Press Enter
Press Enter to auto-detect the HDD on this channel. If
detection is successful, it fills the remaining fields on this
menu.