Lightolier Advent Lytespan 1 and 2 Circuit Track 6101 - Manual

Advent Lytespan ® 1 and 2 Circuit Track
6101
Page 1 of 4
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2009 Philips Group • G0309
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier is a Philips group brand
47-7/8"
95-7/8"
47-7/8"
95-7/8"
95-7/8" 95-7/8"
95-7/8"
43-3/8"
91-3/8"
139-3/8"
1/16"
1-5/32"
2
5
1-3/32"
7
1
6
4
3
Plain Track
Individual Track Joiner Track
Individual Track Joiner Track Joiner Track
9 10
8
Features
1. Advent Lytespan Track: 6063-T5 Aluminum 0.070" wall thickness.
2. Track Mounting Clips: 0.024 Spring steel, in black or white; order separately.
3. Toggle Bolt & Screws: furnished with track units.
4. Conductor (3): 20A current carrying capacity.
5. Insulating Liner: 0.040" wall, thermoplastic.
6. Neutral Conductor: on bead side of track.
7. Polarity Bead: identifies the neutral conductor.
8. Live End: molded thermoplastic. Includes contacts for power supply leads.
9. Dead End Cover: molded thermoplastic.
10. Mini Coupler: connects track units mechanically and electrically.
Mechanical
Track units plug together and lock securely to prevent accidental separation.
Track units can be field cut.
Finish
All painted finishes are baked enamel.
Mounting
Track may be surface mounted to ceilings or walls. The track may be stem mount-
ed. The track is not intended to be cable mounted. The track can also be recessed,
see Specification Sheet 7515.
Electrical
Two circuits individually controllable, rated 20 amps. at 120 volts 60 Hz per track
circuit (40 amps total for the two circuits), when supplied by a 120/240 volt, 60-Hz,
single phase 3-wire branch circuit with a grounded neutral. The track is polarized
and continuously grounded throughout.
Electrical (continued)
Electrical conductors are concealed in a insulating liner. Lytespan lighting units
attach to the track at any point and can be adjusted to operate on either track
circuit. Not intended for use with a power cord or a convenience receptacle
adapter. Magnetic and electronic transformers require different dimmer controls.
Use the proper control device on the track. Caution should be used when operat-
ing dimming controls on 3 wire circuiting (the neutral conductor may overload).
For additional information on dimming, call 1-800-833-3664. All wiring must be in
accordance with National and Local Codes.
Labels
cUL, IBEW.
Finishes Individual Track Joiner Track Plain Track
4’ Catalog No. 8’ Catalog No. 8’ Catalog No. 4’ Catalog No. 8’ Catalog No. 12’ Catalog No.
Matte White 6101NWH 6102NWH 6103NWH 6104NWH 6108NWH 6112NWH
Matte Black 6101NBK 6102NBK 6103NBK 6104NBK 6108NBK 6112NBK
Aluminum 6101NAL 6102NAL 6103NAL 6104NAL 6108NAL 6112NAL
6060NAL
6060WH
6060BK
6061NAL
6061WH
6061BK
6096WH
6096BK
6101NAL
6101NWH 6101NBK
6102NAL
6102NWH
6102NBK
6103NAL
6103NWH
6103NBK
6104NAL
6104NWH
6104NBK 6108NAL
6108NWH
6108NBK
6112NAL
6112NWH
6112NBK
6146NAL
6146NWH
6146NBK
6148NAL 6148NBK
6148NWH
6149NAL
6149NWH
6149NBK
6150NAL
6150NWH
6150NBK
6151NAL
6151NWH 6151NBK
6152NAL
6152NWH
6152NBK
6153NAL
6153NWH
6153NBK
6154NBK
6154NAL
6154NWH 7480
7480AL
7481
7582
7582AL
7584
7584AL
7681AL
7681
7683