Lowrance electronic LMS 335C DF - Manual (Page 152)

144
4. The Edit Waypoint menu appears. You can simply save the waypoint
by pressing
EXIT | EXIT or you can edit the waypoint.
Set a Waypoint by Projecting a Position
This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position can be se-
lected from your waypoint list, a map feature or from the Points of In-
terest list.
1. Press WPT |
↑ to
M
Y
W
AYPOINTS
|
→ to
N
EW
| ENT .
2. Press
↓ to
P
ROJECTED
P
OSITION
| ENT |
↑ to
C
REATE
| ENT .
3. Press
↓ to
C HOOSE R EFERENCE
| ENT . Use
↑ and ↓ to select a waypoint,
map feature or Point of Interest. When the point has been selected,
press
ENT and the point's position appears as the reference position.
4. Press
↓ to
D
ISTANCE
| ENT . Press
↑ or ↓ to change the first character,
then press
→ to the next character and repeat until the distance is cor-
rect. Press ENT .
5. Press
↓ to
B EARING
| ENT . Press
↑ or ↓ to change the first character,
then press
→ to the next character and repeat until the bearing is cor-
rect. Press ENT .
6. Press
↑ to
P ROJECT
| ENT . The Edit Waypoint menu appears. You can
simply save the new projected waypoint by pressing EXIT | EXIT or you
can edit the waypoint. (Press EXIT | ENT if you want to immediately be-
gin navigating to the new waypoint.)