Lucent Technologies 5800 Series User Manual
Page 19
Efficient Networks
®
5800 Series
User Reference Guide
Chapter 2: Easy Setup
Efficient Networks
®
Page 2-5
1. If you have selected PPP as your WAN protocol, you will see a
screen requesting a PPP User Name and a PPP Password. Enter
this information in the fields provided.
2. Select one of the following PPP Networking options:
–
Bridging will forward all traffic for remote hosts that is not
routed (non-IP) to the WAN.
–
IP Routing will route all IP packets for remote hosts to the
WAN.
–
Network Address Translation (NAT) allows multiple
workstations on your LAN to share a single, public IP
address. All outgoing traffic appears to originate from the
router’s IP address.
–
NetBIOS is a PC networking protocol that can keep network
connections open inadvertently. To avoid excess connection
charges, such traffic should be blocked on any metered
network service.
Click on the Next button to continue Easy Setup.