Speed control, Setting speed control, Driver controls – Lincoln 2008 Mark LT User Manual

Page 94

Advertising
background image

Never adjust the accelerator and brake pedal with feet on the
pedals while the vehicle is moving.

SPEED CONTROL

With speed control set, you can maintain a set speed without keeping
your foot on the accelerator pedal.

Do not use the speed control in heavy traffic or on roads that
are winding, slippery or unpaved.

Setting speed control

The controls for using your speed
control are located on the steering
wheel for your convenience.

1. Press the ON control and release
it.

2. Accelerate to the desired speed.

3. Press the SET control and release
it.

4. Take your foot off the accelerator
pedal.

5. The indicator

light on the

instrument cluster will turn on.

Note:
• Vehicle speed may vary momentarily when driving up and down a

steep hill.

• If the vehicle speed increases above the set speed on a downhill, you

may want to apply the brakes to reduce the speed.

• If the vehicle speed decreases more than 10 mph (16 km/h) below

your set speed on an uphill, your speed control will disengage.

2008 Mark LT (mlt)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

94

Advertising