Lowrance electronic GlobalMap 4800M - Manual (Page 80)

74
It's shown as a ratio, for example 1:24000. Press EXIT and the unit re-
turns to the Configure Map Fix screen.
Configure a map fix so the unit can find your position on a printed
chart or topographical map.
Press
→ to
S ELECT O RIGIN
| ENT | ENT | ENT to bring up the waypoint list.
Select the waypoint that you saved the reference point under and press
ENT . The unit displays a waypoint information screen with the com-
mand S
ET
A
S
O
RIGIN
selected; press ENT and the unit returns to the Con-
figure Map Fix menu. Finally, press EXIT to erase this menu. Now press
↑ to
C
OORD
S
YSTEM
| ENT , select M
AP
F
IX
from the list and press ENT | EXIT .
All position information now shows as a distance from the reference
point you chose.
Customize Page Displays
The Position, Navigation, and Map pages all have customizable options.
These options decide which information is viewable on each page.
Customize Satellite Status Page
While on the Satellite Status Page, press
MENU |
↓ to
C USTOMIZE
| ENT .
Press
↓ or ↑ to select a data box. With the data box highlighted and
flashing, press ENT to open a list of options. Scroll
↑ and ↓ to select a
different data option, then press ENT . After all options are set, press
EXIT to return to the page display.
Customize Navigation Page
While on the Navigation Page, press
MENU |
↓ to
C
USTOMIZE
| ENT . Press
↓
or
↑ to select a data box. With the data box highlighted and flashing,
press ENT to open a list of options. Scroll
↑ and ↓ to select a different
display option, then press ENT . After all options are set, press EXIT to
return to the page display.