Lobos Tech LB-FEA800M - Manual (Page 27)

Create a VLAN Group
Create a VLAN and add tagged /untagged member ports to it.
1. VLAN Name: Type a name for the new VLAN.
2. VLAN ID: Type a VID (between 2~4094). The default is 1.
3. Protocol VLAN: Press Space key to choose protocols type.
4. Mode: Press Space key to choose VLAN member. There are three types
to select as 802.1Q, 802.1Q with GVRP and PortBase.
n Untagged: the member port is un-tagged port.
n Tagged: the member port is tagged port.
n NO: The port is not member of this VLAN group.