LevelOne ViewCon KVM-0405 User Manual

Page 7

Advertising
background image

11

Troubleshooting

Ensure that all cables are well seated. Check
that keyboard/mouse cables are not swapped.
Label the cables for each computer to avoid
confusion when connected to the device.

Symptom Causes

Solutions

Keyboard or

mouse does not

work

Improper power-up

sequence.

Keyboard or

mouse not properly

initialized.

Press and hold down the

push button for 3

seconds, the

LevelOne

Palm-Sized KVM

will

re-initialize the keyboard

and mouse.

If problem persists,

unplug the keyboard or

mouse, wait for few

seconds then plug it back.

Keyboard error

on boot

Loose keyboard

connection.

Make sure keyboard

cables are well seated.

Keyboard

strokes shifted

The computer was

in shifted state

when last switched

Press both SHIFT keys.

Computer can

not use serial

mouse.

The

LevelOne

Palm-Sized KVM

does

not support serial mouse.

Scan Rate was

set to 30 sec

and becomes 3

sec.

All connecting

computers are

powered off.

LevelOne
Palm-Sized KVM

r resets.

Set the Scan Time again

and keep at least one

computer on all the time.

Package Contents:

The complete KVM-0205 contains:

KVM-0205(2-port KVM)

x 1

Custom cable set 1.8M(6ft) x 2
User’s manual

x 1


The complete KVM-0405 contains:


KVM-0405(4-port KVM)

x 1

Custom cable set 1.8M(6ft) x 4
User’s manual

x 1









Advertising
This manual is related to the following products: