Lindy Wireless LAN Router - Manual (Page 5)

3
Features:
High speed data transfer rate
Supports NAT for share 1 IP address to all LAN/WLAN users.
Supports PPPoE and PPTP protocol for Dial-Up ADSL.
Supports 64/128 bit WEP Encryption
Supports WPA-PSK, WPA2-PSK, WPA, WPA2 security
Supports DHCP Server / Client.
Supports UPnP (Universal Plug and Play).
Supports Virtual Server mapping.
Supports Packet filtering.
Supports Protocol filtering
Support Domain filtering
Supports DNS
Simple Firewall protection.
Upgradeable firmware for future function.
Simple setting using Setup Wizard.
Easy configuration via WEB Browser.
4
UNPACKING AND SETUP
This chapter provides unpacking and setup information for the 108Mbps Super-G TM
Wireless LAN Router.
Unpacking
Open the box of the WLAN Router and carefully unpack it. The box should contain
the following items:
One 108Mbps Super-G TM Wireless LAN Router
One dipole antenna
One external power adapter
One CD-ROM with this User’s Guide
If any item is found missing or damaged, please contact your local reseller for
replacement.
Setup
The setup of the WLAN Router can be performed properly using the following
methods:
The power outlet should be within 1.82 meters (6 feet) of the Broadband Router.
Visually inspect the DC power jack and make sure that it is fully secured to the
power adapter.
Make sure that there is proper heat dissipation from and adequate ventilation
around the Broadband Router. Do not place heavy objects on the Broadband
Router.
Fix the direction of the antennas. Try to place the Wireless Router in a position
that can best cover your wireless network. Normally, the higher you place the
antenna, the better the performance will be. The antenna’s position enhances the
receiving sensitivity.