Lucent Technologies Stinger MS+DSL - Manual (Page 2)

To learn more, contact your local Lucent
Technologies Representative, Authorized
Reseller, or Sales Agent.
Or, visit our Web site at www.lucent.com
Specifications subject to change
without notice.
This document is for planning purposes
only, and is not intended to create,
modify or supplement any Lucent
Technologies specifications or warranties
relating to these products or services.
Information and/or technical
specifications supplied within this
document do not waive (directly or
indirectly) any rights or licenses –
including but not limited to patents or
other protective rights – of Lucent
Technologies or others.
Stinger and Navis are registered
trademarks of Lucent Technologies.
Copyright © 2005
Lucent Technologies, Inc.
Printed in the U.S.A.
STMS v2.0305
Technical Specifications
Description Specifications
1.Electrical Specifications
Power Requirements: -48 VDC @ 770 Watts maximum
Inrush: All modules have inrush limiting circuits
Power Connectors: x2 M5 Studs per unit
Input Redundancy: Optional input available
Hot Swappable: Yes, both inputs can be Hot swapped
2.Physical Specifications
Height: 17.78 cm [7.0 in] [4U]
Width: 44.90 cm [17.7 in]
Depth: 39.00 cm [15.35 in]
Unit Weight: 30 kg [66 lbs] max – (Fully Configured)**
Rack Mount Options: Forced Air Cooled
Intake/ Exhaust
Fits 19-in, 23-in and ETSI racks with
the appropriate rack mounting ears
not to block airflow
Not to be blocked by more then 20%**
3.Card Slots
Front Access: 4 for line interface modules (LIMs)
1 for control module
Rear Access: 4 for line protection modules:
(LPMs), path selector modules
(PSMa), and/or Copper Loop Test
(CLT) modules
1 for trunk module (TM)
4.Line Interface 50 – pin RJ-21X
5.Trunk Interface
OC-3c/STM-1 optical Single mode
(standard or long-reach options)
Multimode
DS3/E3 electrical with pass through
OC-12/STM-4
10/100 Ethernet
Gigabit Ethernet
6.Operating Environment
Ambient operating temperature 32° to 131°F (0° to 55°C)
Relative humidity 10% – 95% (non-condensing)
Operating altitude Up to 4,000m (13,123 ft)
7.Regularity Compliance
Bellcore GR-63-CORE
Bellcore GR-1089-CORE
EN/IEC 60950 (CE)
EN 55022 Class A
EN 300386-2
8.Model Numbers
Stinger MS+Base unit with pre-installed:
19" Rack Mount Kit
(STGRMSP19-UNIT-MODEL)
23" Rack Mount Kit (STGRMSP23-UNIT-MODEL)
ETSI Rack Mount Kit (STGRMSPETSI-UNIT-MODEL)
** Estimated