Lenovo E74 - Manual (Page 11)

UNPACKING PROCEDU
1. 2.
3. 4.
5.
REREPACKING
Save the original box and all packing material for
future shipping needs.
SETUP
This monitor works with platforms running at
horizontal frequencies between 30 and 69 kHz.
Step 1: Install the monitor
• To connect the tilt/swivel base to the monitor,
align hooks with the sockets on bottom side of
the monitor, and gently push the base towards
the front of the monitor.
• Put monitor on a flat and stable working
bench.
Step 2: Connect your monitor to your
computer
• Turn off the monitor and computer and
unplug the computer power cord before
connecting. Connect the video signal cable to
the video output of your computer
• The 15-pin D-shell signal connector on the
signal cable will connect easily to the video
adapter output on your personal computer.
Tighten both screws on the connector to
ensure a firm connection.
Note
• Do not touch the pins of the video signal
cable connector as this might bend the pins.
• When connecting the video signal cable,
check the alignment of the video input
connector. Do not force the video input
connector in the wrong way or the pins might
bend.
US-3