Lenmar PPU5000 - Manual

Model: PPU5000
PowerPort™ Duo - Portable Battery & Charger
PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS PRODUCT. IT CONTAINS IMPORTANT
OPERATING INSTRUCTIONS FOR YOUR UNIT.
Owner’s manual
Thank you for purchasing the PowerPort Duo. Take the compact, lightweight PowerPort with you
wherever you go and have a handy charger or rescue battery that works anywhere! PowerPort charges
your PDA, mobile phone, MP3 player, game system, or almost any device that can be charged via a USB
cable connection.
Included in the package you have purchased:
Portable Battery & Charger, USB charging cable, User manual
Note: PowerPort Duo must be charged prior to first use. It may become warm during charging and use.
Connecting the PowerPort Duo to your Device
Attach your device using its USB charging cable to the PowerPort Duo.
Once attached via its USB cable, push the “On/Off” button once to turn it
on. Depending on the device it will now either power on or start to charge.
Caution
- Do not overcharge the PowerPort. This will shorten the life span of the device.
- Disconnect the PowerPort as soon as it is practical after the charge is complete.
- Recycle or dispose of PowerPort properly. If disposed of in fire or short–circuited, PowerPort may leak or
explode, causing personal injury.
- When not in use, unplug the PowerPort from all cables and devices.
- Do not drop.
You can charge the PowerPort Duo with the included Mini USB to USB
cable. Just plug the Mini USB into the case, and the other end into your
computer’s USB port, a USB wall plug style adapter, or a USB DC car
adapter.
The LED status indicators show the current charging status of the
PowerPort Duo. The LEDs will blink and become steady as it charges,
from left to right the 1st LED, 2nd LED, and finally the 3rd LED. Once the
3rd LED has become steady, the charging process has finished.
With the built in “ON / OFF” button you have the option of using the PowerPort Duo
when you need it.
When you need an extra charge in your phone, just push the button to turn “ON”
When you are ready to turn it “OFF” just push the button again and the
PowerPort Duo will shut “OFF.”
Note: For devices that require over 500mA and up to 1.0A, use the USB
Port 1, and for those devices that require 500mA and below use Port 2.
Limited 1 Year Warranty
Lenmar product is warranted to be free of defective parts and workmanship for stated period from the original date of purchase. Warranties are not transferable.
The warranty excludes damage resulting from accident, misuse, modification, delay or loss of use, damage to equipment or by normal wear and tear.
ALL WARRANTY REQUESTS MUST BE SUBMITTED AT: www.lenmar.com/warranty
INCLUDE A COPY OF ORIGINAL PROOF OF PURCHASE WITH RETURNED BATTERY OR THE CLAIM WILL BE DENIED.
Copy of Proof of Purchase from an authorized Lenmar Dealer must include the following:
- The company where the product was purchased
- The date of purchase
- The model number of the product purchased
- Send back the product freight prepaid (we recommend insuring the package as Lenmar will not be responsible for shipments lost or damaged in transit).
Include $10.00 payable to Lenmar Battery Solutions for processing fee for ship to address in the Continental United States.
Include $15.00 for ship to address in Hawaii, Alaska or Canada.
Send to:
Lenmar Battery Solutions
Attn: Return Department
4035 Via Pescador
Camarillo, CA 93012-5050
Use preprinted Lenmar shipping label or clearly print your RA Number on the outside of the shipping carton.
Proposition 65 Notice (California)
The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel Environmental Justice Foundation against
multiple electronics and appliance manufacturers
• WARNING: Handling the cord on this product will expose you to lead, a chemical known to the state of California to cause birth defects or
other reproductive harm. Wash hands after handling.
For additional questions, comments or to explore other Lenmar battery solutions, visit our web site at: www.lenmar.com or call 800/424-2703 from 9AM – 5PM PST.
Charging your PowerPort Duo
On/Off Button
The integrated LED status indicator tells you exactly how much battery
power is left in your PowerPort Duo, simply press the “ON / OFF” button. The
1st LED will indicate 30% or less charge remaining, the 2nd LED will indicate
between 30 – 70% charge remaining, and the 3rd LED will indicate 70 -100%
charge remaining.
Once you are finished, simply press the “ON / OFF” button again to turn it “OFF.”
Input: DC 5V, 850mA max.
Output 1: USB DC 5V 1.0A
Output 2: USB DC 5V 500mA
Charge time: Approx. 8.5 hrs.
Charge current: 850mA max.
Voltage: 3.7V DC
Capacity: 5000mAh
Wh: 18.5
Chemistry: Lithium-Polymer
Weight: 145g
Dimensions: 110 x 70 x 16mm
Checking remaining capacity of the case
Specifications
310-552-33-0915 r1 y1
Lithium-Polymer battery must be
recycled or disposed of properly.
On/Off Button
Port 2 Port 1
Charging Input
LED
Status
Indicator
USB