Lenoxx Electronics CD-160 - Manual (Page 15)

TTTTTO PLA O PLA O PLA O PLA O PLAY YY Y Y A A A A A CASSETTE T CASSETTE T CASSETTE T CASSETTE T CASSETTE TAPE APE APE APE APE
1. Open the Cassette Door by pressing the Cassette Stop/Eject Button (in some
cases, you may have to press the Cassette Stop/Eject Button twice since this
button has combined functions).
2. Insert the cassette tape, with the exposed tape facing downwards, into the tracks
in the Cassette Door with the full reel on the left side, make sure the
tape inside is not slack or loosely wound. If it is, insert a pencil into the reel and
turn until the tape is wound up (see Page 13).
3. Close the Cassette Door.
4. Press the Power Switch, the Power/Batt. Lamp will light.
N O T E : N O T E : N O T E : N O T E : N O T E : If the Cassette Play Button does not stay down, your tape If the Cassette Play Button does not stay down, your tape If the Cassette Play Button does not stay down, your tape If the Cassette Play Button does not stay down, your tape If the Cassette Play Button does not stay down, your tape
may have reached the end, reverse the tape or press may have reached the end, reverse the tape or press may have reached the end, reverse the tape or press may have reached the end, reverse the tape or press may have reached the end, reverse the tape or press
R e w i n d . R e w i n d . R e w i n d . R e w i n d . R e w i n d .
7. Adjust the Volume Control and Bass Boost Switch to your listening preference.
8. To stop the tape manually, press the Cassette Stop/Eject Button.
9. To remove the tape, press the Cassette Stop/Eject Button again and the Cassette
Door will open.
14
6. Press the Cassette Play Button. The cassette tape will play till it reaches the end
and then stop.
FULL
REEL
EMPTY
REEL
OK NO
RELA RELA RELA RELA RELAY YY Y Y PLA PLA PLA PLA PLAY YY Y Y
To play tapes in Deck A and then Deck B, follow the steps below.
10.To listen to the other side of the tape, remove the cassette tape, reverse it and re-
insert into cassette compartment, then press the Cassette Play Button.
5. Press the Tape Switch, the Tape Indicator will light.
11.To shut the power off, press the Power Switch again, the Power/Batt. Lamp will go
off.
1. Press the Cassette Play Button on Deck A.
2. Press the Cassette Pause Button on Deck B.
3. Press the Cassette Play Button on Deck B, Deck A will play first and when it finishes,
Deck B will start playing automatically.
4. When the tape finishes playing on Deck B, the set will stop.
CD-160S050699 V.2 E