LevelOne FNS-1000 - Manual (Page 19)

Administration
Overview
This Chapter describes using the Web-based Administration interface.
For details on using the Windows utility, see the Basic Installation & Setup Chapter.
The Web-based Administrative Interface
To establish a connection from your PC to the NAS Server:
1. Start your WEB browser.
2. In the Address box, enter "HTTP://" and the NAS Server's IP Address. If using the default IP address:
HTTP:// 192.168.0.100
Note: If the port number used by the NAS has been changed (on the System screen) from the default
(80), you must specify the correct port number when you connect.
For example, if the current port is 8080:
HTTP://192.168.0.100:8080
3. Once connected, the following screen is displayed.
NAS Home Page
4. To access the Administration interface, click on the "Administration" link on the right.
You will then be prompted for a password, as shown below.
Page 17