Polycom RMX 1500 - Manual (Page 4)

4
—
Optional. Connect the Shelf Management cable to the Shelf port.
—
Connect the E1/T1 cables to their PRI (1-4) ports (if applicable)
First Entry Power-up
8 Insert the USB key with the modified IP addresses in the USB port
on the front panel.
9 Power the RMX ON.
The parameters in the lan.cfg file are uploaded from the USB key to
the RMX’s memory and applied during the power-up sequence.
System power-up sequence may take up to five minutes.
During the first-time power-up the red ERR LED on the RMX’s
front panel remains ON until both the Management and IP
Network Services have been defined.
When the RMX's configuration is completed (including the
Management and IP Network Services), and if there are no System
Errors, the green RDY LED on the CNTL module (on the RMX’s
front panel) turns ON.
10 Remove the USB key.
Product Registration and Activation Key Retrieval
Before starting the initial configuration process, register the RMX at the
Polycom Resource Center website and download the product activation
key file to the computer you will use for the configuration:
1
Using a Web browser, connect to
http://portal.polycom.com
.
2 Login with your Email Address and Password or register as a new
user.
3 Select the Product Registration link.
4 Follow the on-screen instructions for Product Registration and
Product Activation. (The RMX’s serial number is on a sticker on the
back of the unit, if needed.)
5 Write down the Product Activation Key number or copy it for later
use.