Polycom SVP010 - Manual (Page 17)

SpectraLink 8000 SVP Server Overview
PN: 1725-36031-001_H.doc 17
The Front Panel of the SVP Server
The SVP Server’s front panel contains ports to connect to power, the
LAN, and to an administrative computer via an RS-232 port. Status
LEDs supply information about the SVP Server’s functioning.
RS-232 Port: male DB-9 connector (DTE) used for RS-232 connection to
a terminal, terminal emulator, or modem for system administration.
Link LEDs:
LNKOK : Lit when there is a network connection.
ACT : Lit if there is system activity.
COL : Lit if there are network collisions.
NETWORK : Port to wired (Ethernet) LAN.
ERROR : Lit when the system has detected an error.
STATUS : Indicate system error messages and status.
1 : Heartbeat, indicates gateway is running.
2 : If active calls.
3 , 4 , 5 : Currently unused.
PWR (power jack): Connects to the AC adapter supplying power to the
system.
Use only the Polycom-provided Class II AC Adapter with output
24VDC, 1A.
Note that the model designation may be found on the label which is
on the side of the SVP Server.
L
N
K
O
K
A
C
T
C
O
L
Status
E
R
R
O
R
3 4 5 1 2 PWR
NETWORK
RS-232