Ethernet link, System locked, Maintenance lock – Polycom SVP010 User Manual
Page 32: Inactivity timeout (min), Enable h.323 gatekeeper
SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco
PN: 1725-36031-001_H.doc
32
Alias IP Addresses are not necessary in Cisco systems.
Enable H.323 Gatekeeper
This option is no longer used.
Ethernet Link
The SVP Server will auto-negotiate unless there is a need to specify a
link speed.
System Locked
This option is used to take the system down for maintenance. The
default entry is
N
(No). Set it at
Y
(Yes) to prevent any new calls from
starting. Return to
N
to restore normal operation.
Maintenance Lock
The system automatically sets this option to
Y
(Yes) after certain
maintenance activities that require reset, such as changing the IP
address.
Maintenance Lock
prevents any new calls from starting. Note
that the administrator cannot change this option. It is automatically
set by the system. Reset the system at exit to clear
Maintenance Lock
.
Inactivity Timeout (min)
Set the number of minutes the administrative module can be left
unattended before the system closes it. This number can be from 1 to
100. If it is set to zero (0), the administrative module will not close due
to inactivity.