Polycom SVP010 - Manual (Page 36)

SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco
PN: 1725-36031-001_H.doc 36
Change Password
If desired, the password to access the SVP Server may be changed.
A password must meet the following requirements:
• It must be more than four characters, but cannot exceed 16
characters.
• The first character must be a letter.
• Numbers or letters are allowed.
• No dashes, spaces, or punctuation marks, etc. are allowed.
Select Change Password from the main menu. A screen similar to the
following will appear:
Enter the information and either select Set Password or press the S key
to set the new password.
If you forget a password, call Polycom Customer Service for
assistance.