Polycom V2IU 4350 User Manual

Page 32

Advertising
background image

User Manual V

2

IU 4350 Converged Network Appliance

3 - 14

802.1p is not currently supported

1.

Select the Network link.

2.

Select Enable VLAN support.

3.

Press Submit.

4.

Select System.

5.

Select VLAN Configuration.

6.

Adjust LAN Port Membership drop-down boxes to specify 802.1 or

802.1q mode, as desired. Press Modify.
If changing modes, the radio-buttons or checkboxes will change from one

style to the other.

7.

Under Add and configure a new VLAN enter a new VLAN ID, the 4350’s

IP address within this VLAN, and the Network Mask. Press Add.
A new VLAN entry will be added to the VLAN Configuration above.

8.

Depending on the mode of a physical port, assign it to one or more

VLANs:

Caution

Be careful when changing a port from 802.1 to 802.1q mode. Any 802.1 devices
connected to that port (such as your management PC!) will loose access to the
4350. Port 4 is only able to receive 802.1 frames, so a PC can always be connected
to this port if the configuration of the other ports is unknown.

Advertising