Polycom 1725-44327-001 User Manual
Page 2
Connect Cables and Stand
Setup
Features
Connect the Ethernet cable as shown above. Connect the AC power
supply as shown above, if not powered via the Ethernet cable.
Follow the instructions provided on the LCD display to sign in,
configure and use the phone.
For more information, go to http://www.polycom.com/support/cx500, or
contact your system administrator.
Soft key
Volume Up/Down
Keypad
Back key
LCD Display
Soft key
Home key
Menu key
Navigation keys
(Up, Down, Select)
Mute key
Speaker
Hookswitch
Reversible tab
(For wallmount
installation)
System Requirements
The following are the minimum software and hardware requirements:
• Ethernet connection
• Access to AC power or Power Over Ethernet (PoE)
• Network access to Microsoft® Lync™ Server 2010 or greater
Speaker key
(Listen only; no microphone)
Security Lock
Handset cord jack
Left Side View
AC Power connection (Optional)
Use if Power over Ethernet
(PoE) is unavailable
NOTE: To ensure adequate support, the stand must be
fully inserted into the slot on the back of the phone.
In-Call Indicator