Polycom SpectraLink SCM408 - Manual (Page 10)

SpectraLink 6100 MCU: Installation and Operation: SpectraLink 6000 System
PN: 1725-36097-001_L.doc 10
Installation Steps and Responsibilities

Task
Description
Wire Contractor
or Electrician
Field Service
Engineer
Customer Project
Mgr/ System Admin
Site Preparation
Determine location of MCU 
Run Cable for System
Run cable to Base Station
locations

Pull cable 
Terminate cable at Base Station
locations 
Prepare and install demarc blocks 
Assign and program ports 
Connect cables to demarc blocks

Install SpectraLink System
Survey site and check
components

Install MCUs 
Install Base Stations 
Install outdoor Base Stations

Connect and register handsets 
Set up diagnostic modem 
Register handsets 
Program handset features

Test handsets

Site certification 