Defining an mcu, Defining an mcu -7 – Polycom DOC2230A User Manual
Page 31
Chapter 3 - Initial System Configuration
3-7
Defining an MCU
To manage and control the MGC unit from the MGC Manager application it
must be added to the MCUs Network list. The MCU IP address must match
the IP address defined in the MCU. For details, see “Initial IP Configuration”
on page 3-1
To define an MCU Connection:
1.
In the Browser pane, right-click the MCU Network icon, and then click
New MCU.
The Add MCU dialog box opens.
2.
In the Name box, enter a name that clearly identifies the MCU using up
to 20 characters (no comma, period or semicolon).
3.
In the IP Address box, enter the IP Address of the MCU (as defined
during the Initial IP Configuration).
4.
Click OK.
The Add MCU dialog box closes.
The new MCU icon and name appear in the Browser pane.
Defining an MCU
Installing the
MGC Manager
Initial IP
Configuration
Connecting
to an MCU
Configuring the
Network Services
Starting the MGC
Manager