Polycom READIMANAGER LX100 - Manual (Page 9)

E NABLING R EMOTE A CCESS
© Polycom, Inc.
7
PC with a network card
ReadiManager LX100 Server
Crossover cable, OR 2 Ethernet cables and a small Ethernet hub or
switch.
To connect the unit
1. Connect the ReadiManager’s Ethernet port to an Ethernet port on the PC
via a crossover cable, or connect both the ReadiManager and the PC to
the same Ethernet switch (or hub) using standard Ethernet cables.
2. Power on both devices.
3. Configure the Network settings of the PC to the following by changing the
TCP/IP properties so that it can communicate with the Polycom
ReadiManager LX100. If you need more instructions on how to perform
this, see the directions on Configuring Network Connections for the unit
on page 11.
IP Address: Can be any IP address from 192.168.1.1
through 192.168.1.253 (e.g. 192.168.1.37)
Subnet Mask: 255.255.255.0
4. Using the PC, launch an Internet Explorer Browser and type
“http://192.168.1.254” in the browser’s “Address” field to access the
ReadiManager LX100 server.
5. When a login prompt appears, enter the following:
Username: administrator
Password: polycom
• If Windows authentication window doesn’t launch then verify that
both the ReadiManager server and the PC each have the correct
network configuration, and that the devices can “ping” each other.
If you do not know how to accomplish this, contact your IT
administrator.
6. When you arrive at the Welcome to Polycom ReadiManager LX100 page,
configure the system to work with your network.