Primera Technology Primera Bravo Automated Opitcal Disc Duplication & Printing System II - Manual (Page 8)

Rear Panel
This illustration shows the input ports found on the rear panel
of the Publisher:
The USB 2.0 Interface is connected to an open USB 2.0 port on
your PC with the USB 2.0 cable, included with your Publisher.
The
Power Input Port connects to the included 100V~240V 12V
switching power supply.
D. PC SYSTEM REQUIREMENTS
Before getting started, it is important for you to verify that
your PC meets the minimum system requirements. Here's
what you need in order to successfully copy discs at 8x or
above with the PrimoDVD 2.1 software:
• 700 MHz or faster Pentium III/IV processor running
Windows 2000 or XP.
• 512 MB or greater RAM
• Free hard drive space of at least 10 GB.
• Available USB 2.0 Port.
If your PC does not have at least these minimum system
requirements, system performance may not be acceptable.
E. MAC SYSTEM REQUIREMENTS
Before getting started, it is important for you to verify that
your computer meets the recommended system requirements.
Here's what you need in order to successfully burn and print
with the Discribe software:
• G4 PowerPC 700MHz or higher running OS X version 10.2
or higher
• 256MB RAM
4 Getting Started
USB 2.0 Port Power Input Port
510873PM.qxd 4/3/2006 4:56 PM Page 4
TOC INDEX