Python 1401 - Manual (Page 25)

17 © 2009 Directed Electronics. All rights reserved.
Using the remote start
Read this user guide, including the Warnings section at the beginning of this
guide before using the remote start. Ensure that the vehicle is parked in an
open area, not in a garage. To use your remote start to pre-warm or pre-cool
your vehicle, remember to set the climate controls to the desired settings before
shutting Off the engine.
To remote start your vehicle:
Press the • A U X button on the remote control. The vehicle parking
lights flash. The vehicle remote starts and stays running for the pro-
grammed run time.
The preset remote start run time is 12 minutes. This can be changed to
between 1 and 60 minutes (see your authorized dealer for programming
changes).
Points to remember
If the hood is open or if the brake pedal is pressed, the vehicle will not remote
start. The remote start shuts down:
When the brake pedal is pressed •
The hood is opened •
When the remote start command is sent again from a remote control •
When runtime expires •