Configuring windows server as an ntp time source – Polycom 1725-31424-001 User Manual
Page 49
Troubleshooting the Polycom CX700 Phone
43
How to Configure DHCP Option 119
To configure DHCP Option 119:
1.
From DHCP Administrator, right click DHCP server name and select Set
Predefined Options.
2.
Leave Option class: as DHCP Standard Options and click Add.
3.
For Name:, enter DNS Search List, set Code: to 119 and Data Type to
String, leave the Array check box unchecked (it is not an array) and click
OK.
4.
Right click Scope Options, select Configure Options, check Option 119
DNS Search List.
5.
In the Value section in the String list box, enter a list of domain suffixes
in your organization delimited by a semi-colon.
For example, contoso.com;corp.contoso.com;fabrikam.com
6.
Click OK to close the Predefined Options and Values page.
Configuring Windows Server as an NTP Time Source
For Windows 2008
To configure Windows 2008 Server as an NTP time source:
1.
Click Start, Run, type regedit in the list box and click OK to open the
Registry editor.
2.
To enable the Network Time Protocol; NTPserver, locate and click
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time
\TimeProviders\NtpServer\
3.
In the right pane, right-click Enabled, then click Modify.
4.
In the Edit DWord Value box, type 1 under Value data, then click OK.
5.
Now go back and click on
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time
\Parameters\NtpServer