Polycom DOC2560A User Manual
Page 98
Chapter 3-Basic Operation
3-20
Reserve
Resources for
Audio Participants
Enter the number of audio participants for which the
system must reserve resources.
Default: 0 participants.
Maximum:
•
MPM Mode: 80 participants.
•
MPM+ Mode: 200 participants (if all ports are set
to Audio Only).
•
MPMx Mode: 720 participants (Double card, with
all ports are set to Audio Only).
•
MPMx Mode: 360 participants (Single card, with
all ports are set to Audio Only).
Maximum Number
of Participants
Indicate the total number of participants that can be
connected to the conference. The automatic setting
indicates that the maximum number of participants
that can be connected to the MCU is determined
according to resource availability.
Note: If a number is specified, it should be large
enough to accommodate the participants specified in
the Reserve Resources for Video/Audio Participants
fields.
Enable ISDN/
PSTN Dial-in
Select this check box if you want ISDN and PSTN
participants to be able to connect directly to the
conference.
ISDN/PSTN
Network Service
The default Network Service is automatically
selected. A different ISDN/PSTN Network Service
can be selected from the Network Services list.
Dial-in Number (1)
Leave this field blank to let the system automatically
assign a number from the dial-in range defined for
the selected ISDN/PSTN Network Service. To
manually define a dial-in number, enter a unique
number from the dial-in number range defined for
the selected Network Service. This number cannot
be assigned to another Conference/Reservation/
Meeting Room/Gateway Profile
Table 3-2
New Conference – General Options (Continued)
Field
Description