Presonus Audio electronic FP10 - Manual (Page 10)

OPERATION
8 | PreSonus 2007
Windows Vista only
Click ‘Install this driver software anyway’ to
continue.
Click ‘Don’t install this driver software’ to exit
setup.
Windows XP only
Click [Continue Anyway] to continue.
Click [STOP Installation] to cancel and setup.
4) Connect your FP10 to your computer using the
included FireWire cable and turn it on.
Click [Next >] to continue.
Multiple FP10’s only
Before connecting your FP10 units to your
computer, connect them together in series (daisy-
chain) via FireWire.
Then connect the chain to your computer using
only one of the available FireWire ports at either
end of the FP10 chain.
NOTE: The FP10 can be chained to the PreSonus
FirePod. However, you must first update your
FirePod’s firmware. Please contact Technical
Support for assistance with this update procedure.